Now at the Telewashwinkel in collaboration with Sipro. Facade impregnation WB (water-based) makes facades made of sand, cement and clay water-repellent.

Facade impregnation WB is based on oligomeric siloxane and silane and should be applied to all stony, dry surfaces. This impregnation is also suitable for making decorative paving dirt- and water-repellent.

Facade impregnation WB is a ready-to-use product and can be applied to grout that is already 3 days old, possibly slightly damp. It does not affect plastics and provides maximum protection for processor and environmental safety.

Facade impregnation WB has a high penetrating power, is odorless and can be used. A facade impregnation WB treatment is durable for at least 10 years. Instructions:

For a lasting waterproof result, take the following 7 steps:

n1. Renovate the surface: repair joints and cracks.

n2. Remove all loose parts.

n3. Preferably clean the surface (degrease it) a few days before the treatment.

n4. Assess the surface for moisture, the impregnating agent must be well absorbed with a minimum consumption of 0.5 liters M2.

n5. Take precautionary measures to avoid splashes on plastics, paving, bitumen and glass.

n6. In case of any spilled splashes, clean immediately with a suitable agent. n7. Apply using the flow method (with a pressure sprayer) under low pressure at a temperature

above 4 degrees C, apply the liquid to the facade. If consumption is lower than 0.5 liters per M2, a 2nd treatment ''wet on wet'' must be carried out.

Facade impregnation WB is resistant to driving rain within a few hours, therefore do not apply it in the rain. Clean tools with water/degreaser. (PC:GIWB)